The On-Lap 1503 series has pioneered a Rear Dock port integrating touch, power, and video signals on the rear of the monitor. Plug the Rear Dock into the dock port and insert a Compute Stick into it, and the 1503I turns into an AIO in a moment. Likewise, inserting an HDMI wireless display adapter or TV stick can create a unique entertainment center!
Suitable models: On-Lap 1503 series
PC/Device: HDMI-A*1(female), USB-A*1(female), USB-C*1(female)
*Suitable for TV stick, Compute Stick, and power bank
On-Lap Monitor: On-Lap1503 Rear Dock connector
Demension: 91mm x 61mm x 18mm
- USB-A to USB-C Power& Touch Signal Cable(2.1m)
- Rear Dock Proprietary USB cable for Stick type computer(20cm)
- Rear dock proprietary USB cable for "Intel Compute Stick/USB type C" (30cm)
- USB-A to USB-C Power Cable (15cm)
- 5V 2A Adapter
- Metal Plaque for power bank
- Slotted Screw-sliver (M2 x 6mm)
*The DC OUT& Touch Signal Output on Rear Dock can only output 5V-2A(Max.) current to compute stick.
Please note that
The Intel® Compute Stick with Intel® M3™ processor requires 5V-2A power input.
The Intel® Compute Stick with Intel® M5™ processor requires 5V-4A power input.
The Intel® Compute Stick with Intel® Atom™ processor requires 5V-3A power input.
Please use intel’s charger to power the Intel® Compute Stick with Intel® M5™ and Atom™.
Signal Direction of the Cables
Please check the signal direction of these cables while installing a Compute Stick or Raspberry Pi. Wrong plugging of the cables won’t make them work properly.